Hot Air Dryer Manufacturers in Bihar
Frequently Asked Questions
A Hot Air Dryer dries yarn, fabric and garments after dyeing, washing or hydro extraction. Hot air flows evenly through the chamber and takes away the moisture, so the material comes out dry and ready for the next process.
Heating can be done with a steam radiator, thermic oil, electric heater or gas burner, depending on the fuel and utilities available in your plant. A high volume blower circulates the hot air through the material.
Yes. The blower keeps the airflow uniform inside the chamber, so every package, hank or piece dries at the same rate with no wet spots.
Yes. The PLC with touch interface lets you set the right temperature and time for each material, such as higher heat for cotton and lower heat for polyester or delicate fibres, so colour and fibre stay safe.
The drying chamber and all air contact parts are made of AISI SS 304 stainless steel, and the outer body has insulated panels with epoxy coating. This gives long life and keeps heat loss low.
Yes. Insulated panels, hot air recirculation and an inverter-driven blower reduce heat loss and power use, which lowers your drying cost.
It has an over-temperature cutoff, airflow switch, door lock and fire protection, so the dryer runs safely even in continuous use.
Tell our team your material type, batch size and preferred heating source, and we will send you complete specifications and a detailed quotation. Contact us at Email Us info@jogson.com or Call Us +91-9999127227.
Salient Features
- Construction : Exterior is made of fully insulated mild steel square pipe and covered with mild steel sheet with powder coated paint finish. Interior, the insulation is covered with galvanized sheet duly coated with high temperature resistant coating.
- Insulation : All sides of dryers cabinet are fully insulated with 50 mm thick glass wool for preventing Heat Loss/ Heat leakage.
- Doors : Front open able hinged doors, insulated with 50 mm thick glass wool & door are lined with silicon rubber gasket for preventing any heat loss.
Locking : In case of single door cabinet, spring and roller type latch is provided & in case of double door cabinet, container type rod locking assembly is provided for effective secure seal. - Air Circulation : Forced air circulation is done by specially designed re-circulation blowers fitted inside the dryers for better uniformity of temperature inside the chamber.
- Ventilation : Very efficient electric De-humidifier operated with digital timer is provided along with adjustable manual air damper.
- Heating : Various heating methods are offered as per the requirement such as electric heating, heating by thermic fluid or steam with fin type heat exchanger.
Carrier Trolley : For loose hanks carrier trolley is provided with aluminum hanger for hanging the hanks. Removable trays are provided for drying loose fiber and trims. Creel type trolley is provided for drying cones and bobbins. Dryers is designed with foldable ramp for loading/unloading the carrier trolley. - Automatic Power Control Panel : Equipped with JOGSON Temperature Programmer TPR-14 which controls up to 8 programs with battery backup, blower fan On/Off, rate of temperature rise, hold time, operator call and memory retention in case of power
Advantages
- Maximum design temperature 140°C
- Heating gradient 25°C – 130°C approx at 5°C /min. (Dry saturated steam pressure at 7 bar), approx at 3oC/min with electric heaters
- Construction : Exterior is made of fully insulated mild steel square pipe and covered with mild steel sheet with powder coated paint finish. Interior, the insulation is covered with galvanized sheet duly coated with high temperature resistant coating.
- Insulation : All sides of dryers cabinet are fully insulated with 50 mm thick glass wool for preventing Heat Loss/ Heat leakage.
- Doors : Front open able hinged doors, insulated with 50 mm thick glass wool & door are lined with silicon rubber gasket for preventing any heat loss.
Locking : In case of single door cabinet, spring and roller type latch is provided & in case of double door cabinet, container type rod locking assembly is provided for effective secure seal.