Multicolor Space Dyeing Machine Manufacturers in Goa
Frequently Asked Questions
It applies several colours on a single yarn package or hank in different zones, so one yarn shows multiple colours or a patterned effect after dyeing. This gives you unique, fancy yarns without blending different coloured yarns.
Colours are applied in separate zones with controlled dosing, and then fixed in the same cycle. This keeps each colour sharp, with clean transitions between zones.
It is widely used for knitting yarn, hosiery yarn, carpet yarn and fancy yarn made from cotton, polyester, nylon, acrylic and blends.
Yes. The PLC with touch interface stores recipes and controls dosing and temperature accurately, so the same pattern can be repeated batch after batch.
All parts that touch the liquor are made of AISI SS 316L stainless steel. It resists corrosion, dyes and chemicals, and lasts for many years of regular use.
Yes. A low liquor ratio, internal heat exchanger and inverter drive reduce water, steam and power use, and also cut dye and chemical waste.
Yes. Multiple safety interlocks protect the operator and machine against high temperature, pressure and pump faults.
Tell our team your yarn type and required capacity, and we will send you complete specifications and a detailed quotation. Contact us at Email Us info@jogson.com or Call Us +91-9999127227.
Salient Features
- With options of 4, 6 and 8 colours
- Machine body stainless steel 304 & all parts coming into contact with the dye liquor are made of AISI SS 316Ti/316L, highly corrosion resistant
- High vacuum through mono block vacuum pump
- Water saving system for vacuum pump
- Liquor transfer through seal less magnetic pumps
- Liquor dosing by highly efficient over head mounted JOGSON Pneumatic Actuated Distribution system
- Automatic dyeing cycles, high productivity, 1 dyeing cycle in about 60 seconds
- Suitable for any type of yarn natural or synthetic, wound on dye spring, plastic tube, steel tube, etc.
- Suitable for dyestuff like Acid, Reacted , Direct, Disperse and Pre-metallized
- Multiple design pattern possibilities
- Power control panel with PLC & touch interface
- Floor level installation
- Individual colour tanks for stocking dyestuff / jerry can connections
Advantages
- Package Preparation: The yarn must be wound on Dye Spring, Plastic Tube, Steel Tube, etc.
- Recipe Preparation: The chemicals & dye-stuff are mixed & put into colour tank
- Dyeing Process: It starts with transferring of mixed liquor from each colour tank to overhead dosing cylinders & distributed uniformly to the package. The uniformity of the printed package is guaranteed both by JOGSON Pneumatic Actuated Distribution system mated with high suction of the vacuum pump.
- Dyestuff Fixation: After dyeing, the package are placed in JOGSON Yarn Conditioning Machine for dyestuff fixation. The process of heat setting & conditioning varies on the type of yarn.
- Washing: To wash out the excess dyestuff the package is then placed in JOGSON yarn dyeing machine
- Drying: Depending on the Yarn, JOGSON Hydro Extractor or JOGSON Hot Air Drier can be used to dry the wet package